Kabel Straight And Crossover

Straight and crossover cable can be cat3 cat 5 cat 5e or cat 6 utp cable the only difference is each type will have different wire arrangement in the cable for serving different purposes.

Kabel straight and crossover. This type of cable will be used most of the time and can be used to. Lakukan pengujian kabel menggunakan lan tester. Untuk membuat kabel susunan crossover langkahnya sama seperti dengan membuah kabel straight pada poin 1 sampai 4. Using the 568 b standard as an example below you will see that pin 1 on connector a goes to pin 3 on connector b.

A utp cable contains eight wires. It is most often used to connect two devices of the same type e g. You usually use straight cable to connect different type of devices. Setelah kedua ujung kabel berhasil dicrimmping.

Two computers via their network interface controllers or two switches to each other by contrast patch cables or straight through cables are used to connect devices of different types such as a computer to a. Straight through and crossover cables are wired differently from each other. The distinction between a straight through crossover and rollover cable comes down to the way that the connectors on each end are wired. Crossover wired cables commonly called crossover cables are very much like straight through cables with the exception that tx and rx lines are crossed they are at opposite positions on either end of the cable.

If the order of the wires is the same on both ends then you have a straight through cable. Straight through crossover and rollover cable differences. One easy way to tell what you have is to look at the order of the colored wires inside the rj45 connector. Pin 2 on connector.

Sedangkan pada ujung yang lain susun seperti dengan standar urutan warna kabel pada kabel crossover yang sudah dijelaskan diatas.